How to play

TV setup & troubleshooting

Get the game
on the big screen.

The Santa’s Swindle TV display is a webpage, so it works almost anywhere you have a modern computer browser—no TV app to install. The best setup is a MacBook or Windows laptop connected to the television with HDMI, with that computer mirrored to the TV.

SourceMac or PCPublic TV webpage
PictureTelevisionFull-screen display
SoundYour choiceTV · soundbar · receiver · speaker · computer

Recommended setup

Connect with HDMI.
Then mirror it.

HDMI gives the television a reliable picture and audio connection without depending on party Wi-Fi. Mirroring puts the same full-size browser page on the laptop and TV. Connect and test the complete setup before guests arrive.

Nearly every modern flat-panel TV has an HDMI input. If yours does not, skip the TV and run the game on the computer screen with its speakers.

Phones cannot be used for the public TV page. Guests can still use phones to join and play, and a host can use a separate phone for private controls.

Use a laptop when possible. A tablet is not recommended because it may keep the smaller tablet viewport and usually needs a device-specific HDMI adapter or cable. If your exact tablet and TV combination works, test the full-screen picture and sound before the party.

MacBook

HDMI from a Mac

  1. Connect the MacBook to the television with an HDMI cable. Use a compatible USB-C or Thunderbolt adapter when the MacBook has no HDMI port.
  2. Use the TV remote to select the HDMI input where the MacBook is connected.
  3. Open Apple menu → System Settings → Displays. Select the television and choose Use as → Mirror for Built-in Display.
  4. Open the room’s public TV page in a maximized browser—not the host controls—and enter full screen.
  5. Open System Settings → Sound → Output and choose the TV, soundbar, receiver, Bluetooth speaker, or MacBook speakers.

No HDMI? AirPlay requires an AirPlay-compatible smart TV or an Apple TV device connected to the television. Put the Mac and AirPlay receiver on the same Wi-Fi, then open Control Center → Screen Mirroring and select it.

Apple’s display-mirroring guide
Windows

HDMI from a PC

  1. Connect the Windows laptop to the television with an HDMI cable. Use a compatible USB-C adapter when the laptop has no HDMI port.
  2. Use the TV remote to select the HDMI input where the laptop is connected.
  3. Press Windows key + P, then choose Duplicate.
  4. Open the room’s public TV page in a maximized browser—not the host controls—and enter full screen.
  5. Open the taskbar sound menu and choose the TV, soundbar, receiver, Bluetooth speaker, or computer speakers.

No HDMI? As a fallback, press Windows key + K and select a compatible Miracast television.

Microsoft’s wireless-display guide

Choose your setup

Seven ways
to run the room.

Start with the picture connection, then confirm exactly which device owns the audio.

  1. 01
    Simple

    TV speakers only

    1. Connect the laptop to the TV with HDMI and select that HDMI input on the television.
    2. Open the public TV page, move the browser window to the television, and enter full screen.
    3. Set the computer’s sound output to the TV or HDMI, then select TV Speakers in the television’s audio settings.

    Audio plays from: the television.

  2. 02
    Existing setup

    TV with a soundbar

    1. Leave the soundbar connected the way it is. Connect the laptop to the TV with HDMI and select that HDMI input on the television.
    2. Mirror or duplicate the laptop display, open the public TV page, and enter full screen.
    3. Set the laptop’s sound output to the TV or HDMI. The television should send the page’s audio through its existing soundbar connection.
    4. If sound still comes from the TV speakers, use the television’s audio menu to select the soundbar or external speaker output it normally uses.

    Audio plays from: the soundbar already connected to the television.

  3. 03
    Largest rooms

    Home theater or projector

    1. Leave the receiver, speakers, and TV or projector connected the way they normally are.
    2. Connect the laptop’s HDMI cable to an available HDMI input on the A/V receiver, then select that input on the receiver.
    3. Mirror or duplicate the laptop display, open the public TV page, and enter full screen. The receiver sends the picture to the TV or projector.
    4. Set the laptop’s sound output to the receiver or HDMI. The receiver plays the page’s audio through the existing speaker system.
    5. Church or assembly hall: give the venue’s A/V person the laptop’s HDMI feed. They can use the same path through the house receiver or video system.

    Audio plays from: the receiver speakers or the venue’s PA system.

  4. 04
    Portable

    Bluetooth speaker

    1. Pair the speaker with the laptop running the TV page.
    2. Select the Bluetooth speaker as that device’s sound output before opening the room.
    3. Keep the speaker charged, disable automatic sleep, and check that its audio delay is acceptable.

    Audio plays from: the Bluetooth speaker. Use HDMI for the picture; casting a Chrome tab sends that tab’s audio to the TV instead.

  5. 05
    No extra gear

    Computer speakers

    1. Connect the computer to the TV with HDMI and place it where the room can hear it.
    2. Move the public TV page to the television, but select the computer’s built-in speakers as the sound output.
    3. Connect power, raise the system volume, and turn off sleep for the duration of the game.

    Audio plays from: the host computer. Use this only when its speakers can fill the room.

  6. 06
    Wireless · laptop

    Chromecast or Google Cast

    1. Put the laptop and Cast-enabled TV or streaming device on the same Wi-Fi, open the public TV page in current Chrome, and maximize the browser window.
    2. Choose Chrome menu → Cast, save, and share → Cast, select the television, and cast the tab rather than the entire screen.
    3. Keep the laptop awake and plugged in. Casting the tab sends that tab’s audio to the TV.

    Phone: not supported for the public TV page. A tablet may preserve its smaller viewport and is only a test-first fallback. Use laptop Chrome for the supported Cast setup.

    Google’s casting instructions
  7. 07
    Wireless · Apple

    AirPlay

    1. Check the TV first: it must support AirPlay either as an AirPlay-compatible smart TV or through an Apple TV device connected to it.
    2. Mac: put the Mac and AirPlay receiver on the same Wi-Fi, open Control Center → Screen Mirroring, and select the TV or Apple TV.
    3. Choose Mirror Built-in Display, maximize the public TV page, enter full screen, and select the TV for sound.
    4. iPad fallback: tablets are not recommended, but if your setup works, use Control Center → Screen Mirroring in landscape and test the viewport, full-screen picture, and sound before the party.

    Phone note: iPhone mirroring preserves the narrow phone layout and is not supported as the party TV display.

    Apple’s AirPlay instructions

Smart TV browser

Possible.
Not guaranteed.

Built-in TV browsers vary widely and may limit modern JavaScript, live connections, storage, full-screen behavior, or audio playback. Treat direct browsing as optional until that exact television passes a full room test.

  • The TV page shows a code you can enter in Host controls on your phone.
  • The live indicator stays connected for at least ten minutes.
  • Turns update without a manual refresh.
  • Character voices and effects play after interacting with the page.

Always keep an HDMI laptop available as the fallback.

Troubleshooting

Find the symptom.
Fix the room.

Start with the public TV page, the picture connection, and one audio destination. Change one thing at a time.

01The TV shows no picture
  1. Confirm the TV is on the HDMI input or wireless receiver you selected.
  2. Unplug and reconnect HDMI at both ends, then try a different HDMI port.
  3. On the laptop, open display settings and choose Extend or Mirror / Duplicate.
  4. If wireless display still fails, switch to HDMI for the game.
02The TV page looks like a phone or tablet
  1. Stop mirroring the phone or tablet. A phone cannot run the public TV page, and a tablet may preserve its smaller viewport instead of creating the full TV layout.
  2. Switch to a laptop connected by HDMI. Use laptop Chrome for Chromecast or a Mac for AirPlay only when HDMI is unavailable.
  3. Maximize the browser window before casting and enter full screen after the TV page appears.
03There is no sound
  1. Raise volume and unmute the browser tab, computer, TV, and selected speaker system.
  2. Confirm the computer’s output matches the intended destination: HDMI/TV, Bluetooth, or built-in speakers.
  3. For a soundbar, confirm the TV is using its normal soundbar output. For an A/V receiver, confirm the laptop is connected to and selected on the correct receiver HDMI input.
  4. Interact with the TV page once, then test audio again; some browsers block sound until the page receives input.
04Sound comes from the wrong device
  1. Open the computer’s sound-output menu and select exactly one destination.
  2. When casting a Chrome tab, expect that tab’s audio on the TV. Use HDMI instead when you need Bluetooth or computer audio.
  3. Mute unused TV, receiver, and computer outputs to prevent accidental double playback.
05Audio is delayed or echoes
  1. Mute every duplicate output so only one device plays the game audio.
  2. Disconnect and reconnect a Bluetooth speaker; move it closer to the source device.
  3. Disable extra TV or receiver sound processing, then test a short voice line.
  4. If timing remains distracting, use HDMI with TV, soundbar, or receiver audio.
06Chromecast or AirPlay does not find the TV
  1. Confirm the TV supports the wireless method: built-in Chromecast or Google Cast for casting, or built-in AirPlay or a connected Apple TV device for AirPlay.
  2. Put the source device and TV or streaming receiver on the same Wi-Fi network.
  3. Turn off guest Wi-Fi, VPN, or network isolation that prevents local devices from seeing one another.
  4. Restart the TV or receiver, Wi-Fi, and source device, then try discovery again.
  5. On newer macOS versions, confirm Chrome has Local Network permission for Cast discovery.
07The TV page disconnects or stops updating
  1. Confirm the live indicator is connected and the host’s internet is still working.
  2. Reload only the public TV page. Do not expose or refresh a player’s private screen on the television.
  3. Keep the source device awake, connected to power, and close enough to reliable Wi-Fi.
  4. If a smart TV browser repeatedly disconnects, move the TV page to a laptop and HDMI.
08The display sleeps, dims, or leaves full screen
  1. Connect the source device to power and temporarily disable sleep, screen lock, and battery-saving modes.
  2. Disable the TV’s eco timer or automatic power-off for the party.
  3. Keep the cast tab or TV page open; closing it ends the display session.

Before guests arrive

Connect it.
Test it.

Hook up the complete setup before the party starts, then test it with the equipment in its party location—not from another room.

  • The TV page fits the full screen and text is readable from the farthest seat.
  • The host controls remain private on a separate device or window.
  • Room code, pairing, and live connection work.
  • A voice line and effect are clear at party volume.
  • Only one speaker path is active; there is no echo.
  • The source device is powered and will not sleep.
  • A phone can join while the TV stays connected.
  • The chosen setup is connected and working; an HDMI cable and laptop are ready as the wireless fallback.
An unhandled error has occurred. Reload

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.